Page 3 of 3
Posted:
Tue Jul 21, 2009 10:50 amby jackryan
Posted:
Tue Jul 21, 2009 11:33 amby ASAN3.1416
Posted:
Tue Jul 21, 2009 1:01 pmby jackryan
Posted:
Mon Sep 07, 2009 4:40 pmby jackryan
I recently posted a recommendation for those interested to buy the BELKIN branded inverter (200w, 220vac/50Hz rated) from the Belkin Store at SM North EDSA Annex Building. This sells for Php 1,690.
The next model is an 85watts version but sells for about php 1,390.
Posted:
Mon Sep 07, 2009 4:41 pmby jackryan
For best results, either you use a car battery or a 12VDC regulated / switched converter that is at least 3 amps (and upwards)...
Re: DIY: Make 50Hz/220VAC motors run under 60Hz/220VAC ***
Posted:
Sun Jun 27, 2010 4:30 pmby bagz727
hi, just want to know where i can buy the 220VAC to 12VDC converter (3-5Amps) regulated? i already have the inverter 220v 50hz form cdr king. thanks
Re: DIY: Make 50Hz/220VAC motors run under 60Hz/220VAC ***
Posted:
Sun Jun 27, 2010 4:54 pmby choypogi07
@bagz
chief, sa ace ko nabili ung converter ko dati.. around 900 ata yun..
Re: DIY: Make 50Hz/220VAC motors run under 60Hz/220VAC ***
Posted:
Sun Jun 27, 2010 4:59 pmby bagz727
ok naman sya, gumagana na mga pump mo?
Re: DIY: Make 50Hz/220VAC motors run under 60Hz/220VAC ***
Posted:
Sun Jun 27, 2010 5:48 pmby choypogi07
yep, gumagana naman.. dati pa yun sir, old setup ko pa..
Re: DIY: Make 50Hz/220VAC motors run under 60Hz/220VAC ***
Posted:
Sat Dec 22, 2012 11:20 pmby bensol
Sir,
I purchased a popsicle machine from China and the power supply specification is 220V/50 Hz 2KW/8Amp. do you have available converter for this machine, or do you know somebody who are supplying converter for high wattage machine. If you have please let me know I want to buy.
Thank you and hoping for your positive reply,
Best regards,
Ben Solomon
Re: DIY: Make 50Hz/220VAC motors run under 60Hz/220VAC ***
Posted:
Tue Jan 15, 2013 11:24 amby jaycee008
AFAIK pwedeng gamitin ang mga 50Hz equipments dito sa atin sa pilipinas, ang masama ay ang vice versa nito (using 60Hz equipments in a country utilizing 50Hz frequency)
Re: DIY: Make 50Hz/220VAC motors run under 60Hz/220VAC ***
Posted:
Tue Jan 22, 2013 11:23 amby jackryan
some motors would run warmer than usual... some motor pumps would seem to run not in-sync...
as for your requirement, unfortunately, your load may be too high to make this as a practical option...