DIY: Make 50Hz/220VAC motors run under 60Hz/220VAC ***

A forum for all those projects you want to build on your own

Postby choypogi07 » Fri Nov 21, 2008 10:17 am

it will run but not operate properly


paki clarify naman po nito.. any noticeable difference on it "not operating properly"? TIA :oops:
User avatar
choypogi07
reefphilippines member
 
Posts: 1282
Joined: Wed May 21, 2008 3:47 pm

Postby jackryan » Fri Nov 21, 2008 11:12 am

motor pump properly will spin erratically particularly if put at a certain depth of the tank...
JackRyan's 225G 6'x2'x2.5' Tank Project

* RO (DDNW-150-6530 2pumps) + ORP
* Teco TR20 + 2x MaxSpect 160w LEDs + Vin's Cab+Sump *
* 2x Vortech MP40W + RKE + FS-WaveBox + 3xTunze Pumps on 2x 7095's + HF20 *
User avatar
jackryan
Moderator
 
Posts: 6596
Joined: Wed Dec 14, 2005 12:22 am
Location: Metro Manila, Philippine Islands

Postby ASAN3.1416 » Sun Nov 23, 2008 4:55 pm

Bro I have now a 300wt power converter (cd-r king ) and AC-DC 12V Converter and 2 unit s BOYU wavemaker 28wt 50hz
I assembled them as per your instruction but unfortunately it's not working properly, the pump turn on and off and the led indicator with the marking of "Fault " on the power converter turn on and off at the same time with beeping sound :roll: :cry: Any suggestion Bro
:?:
22 gal AGA nano w/ ATS and Cheato
150 par 38 MH 20k
User avatar
ASAN3.1416
reefphilippines supporter
 
Posts: 1319
Joined: Sun Feb 03, 2008 3:33 pm

Postby jackryan » Sun Nov 23, 2008 5:03 pm

ASAN3.1416 wrote:Bro I have now a 300wt power converter (cd-r king ) and AC-DC 12V Converter and 2 unit s BOYU wavemaker 28wt 50hz
I assembled them as per your instruction but unfortunately it's not working properly, the pump turn on and off and the led indicator with the marking of "Fault " on the power converter turn on and off at the same time with beeping sound :roll: :cry: Any suggestion Bro
:?:


Check your converter source... is it a regulated or switched version? what is the ampere rating of the converter? You should have at least a regulated version and at least NO less than 3amps rated converter.
JackRyan's 225G 6'x2'x2.5' Tank Project

* RO (DDNW-150-6530 2pumps) + ORP
* Teco TR20 + 2x MaxSpect 160w LEDs + Vin's Cab+Sump *
* 2x Vortech MP40W + RKE + FS-WaveBox + 3xTunze Pumps on 2x 7095's + HF20 *
User avatar
jackryan
Moderator
 
Posts: 6596
Joined: Wed Dec 14, 2005 12:22 am
Location: Metro Manila, Philippine Islands

Postby jackryan » Sun Nov 23, 2008 5:37 pm

obet_carlos wrote:para sa 50Hz pala.. hindi ko nabasa yung title..:D
we can still use this circuit to and modify it sa 60V tapos kabit sa battery ng kotse.. hehe!


bro, i know this is an old post, pero if that is your requirement, just get the inverter from cdrking... :wink:
JackRyan's 225G 6'x2'x2.5' Tank Project

* RO (DDNW-150-6530 2pumps) + ORP
* Teco TR20 + 2x MaxSpect 160w LEDs + Vin's Cab+Sump *
* 2x Vortech MP40W + RKE + FS-WaveBox + 3xTunze Pumps on 2x 7095's + HF20 *
User avatar
jackryan
Moderator
 
Posts: 6596
Joined: Wed Dec 14, 2005 12:22 am
Location: Metro Manila, Philippine Islands

Postby ASAN3.1416 » Sun Nov 23, 2008 6:24 pm

jackryan wrote:
ASAN3.1416 wrote:Bro I have now a 300wt power converter (cd-r king ) and AC-DC 12V Converter and 2 unit s BOYU wavemaker 28wt 50hz
I assembled them as per your instruction but unfortunately it's not working properly, the pump turn on and off and the led indicator with the marking of "Fault " on the power converter turn on and off at the same time with beeping sound :roll: :cry: Any suggestion Bro
:?:


Check your converter source... is it a regulated or switched version? what is the ampere rating of the converter? You should have at least a regulated version and at least NO less than 3amps rated converter.


Kolin AC-DC 12V 3Amp 36 wt Bro I think its a switch version :roll:
22 gal AGA nano w/ ATS and Cheato
150 par 38 MH 20k
User avatar
ASAN3.1416
reefphilippines supporter
 
Posts: 1319
Joined: Sun Feb 03, 2008 3:33 pm

Postby jackryan » Sun Nov 23, 2008 9:34 pm

mine works... either the ac-to-dc converter or dc-to-ac inverter has a problem --- the other way is try to connect one pump at a time and check if the problem still persists...

if you can check the output of your ac-to-dc converter (in DC voltage) and dc-to-ac interver (in AC voltage) that would also help us isolate the problem...
JackRyan's 225G 6'x2'x2.5' Tank Project

* RO (DDNW-150-6530 2pumps) + ORP
* Teco TR20 + 2x MaxSpect 160w LEDs + Vin's Cab+Sump *
* 2x Vortech MP40W + RKE + FS-WaveBox + 3xTunze Pumps on 2x 7095's + HF20 *
User avatar
jackryan
Moderator
 
Posts: 6596
Joined: Wed Dec 14, 2005 12:22 am
Location: Metro Manila, Philippine Islands

Postby JojoD818 » Mon Nov 24, 2008 3:22 pm

Hi Jack,

I'm here na... :lol:

Can we do the wavemaker controller project 1st? 8)
User avatar
JojoD818
reefphilippines member
 
Posts: 31
Joined: Sun May 18, 2008 11:33 am

Postby jackryan » Mon Nov 24, 2008 3:28 pm

JojoD818 wrote:Hi Jack,

I'm here na... :lol:

Can we do the wavemaker controller project 1st? 8)


Great bro!

Welcome to another hobby addiction!!! Your expertise will be well receive the community here...

Cheers,
-JackRyan
JackRyan's 225G 6'x2'x2.5' Tank Project

* RO (DDNW-150-6530 2pumps) + ORP
* Teco TR20 + 2x MaxSpect 160w LEDs + Vin's Cab+Sump *
* 2x Vortech MP40W + RKE + FS-WaveBox + 3xTunze Pumps on 2x 7095's + HF20 *
User avatar
jackryan
Moderator
 
Posts: 6596
Joined: Wed Dec 14, 2005 12:22 am
Location: Metro Manila, Philippine Islands

Postby JojoD818 » Mon Nov 24, 2008 3:35 pm

jackryan wrote:
JojoD818 wrote:Hi Jack,

I'm here na... :lol:

Can we do the wavemaker controller project 1st? 8)


Great bro!

Welcome to another hobby addiction!!! Your expertise will be well receive the community here...

Cheers,
-JackRyan



Thanks man, have been into freshwater for some time already, never thought that fish keeping would require electronics too... :lol:

Anyway, I don't want to start another thread re wavemaker controller so I posted here: http://www.reefphilippines.com/forums/v ... 5&start=15


Cheers

Jojo
User avatar
JojoD818
reefphilippines member
 
Posts: 31
Joined: Sun May 18, 2008 11:33 am

Postby jackryan » Mon Nov 24, 2008 4:25 pm

Jojo,

Here's your special DIY electronics / electrical thread...
http://www.reefphilippines.com/forums/v ... php?t=6783


Cheers,
JackRyan
JackRyan's 225G 6'x2'x2.5' Tank Project

* RO (DDNW-150-6530 2pumps) + ORP
* Teco TR20 + 2x MaxSpect 160w LEDs + Vin's Cab+Sump *
* 2x Vortech MP40W + RKE + FS-WaveBox + 3xTunze Pumps on 2x 7095's + HF20 *
User avatar
jackryan
Moderator
 
Posts: 6596
Joined: Wed Dec 14, 2005 12:22 am
Location: Metro Manila, Philippine Islands

Postby ASAN3.1416 » Tue Jul 21, 2009 7:42 am

May nagpahiram sakin ng wavemaker na ito :shock: :D kaya lang ito ay 50 hz

Image



[img][img]http://i322.photobucket.com/albums/nn434/ASAN31416/Picture007.jpg[/img]

I tried to used an inverter but it didn't work

Image

Image

I don't know if the inverter is 50Hz, I asked someone in CD-R King but unfortunately he didn't knew also :cry:

Any suggestion from the expert (diy ghetto) :D


Many thanks Sir JB :D
22 gal AGA nano w/ ATS and Cheato
150 par 38 MH 20k
User avatar
ASAN3.1416
reefphilippines supporter
 
Posts: 1319
Joined: Sun Feb 03, 2008 3:33 pm

Postby obet_carlos » Tue Jul 21, 2009 8:33 am

malamang 60Hz yang inverter..:D
User avatar
obet_carlos
reefphilippines supporter
 
Posts: 6530
Joined: Sat Jan 13, 2007 7:00 am
Location: Parañaque

Postby ASAN3.1416 » Tue Jul 21, 2009 9:21 am

obet_carlos wrote:malamang 60Hz yang inverter..:D


baka nga Bro Obet :( may alam ka ba na store where I can buy 50Hz inverter na cheapy lang :lol:
22 gal AGA nano w/ ATS and Cheato
150 par 38 MH 20k
User avatar
ASAN3.1416
reefphilippines supporter
 
Posts: 1319
Joined: Sun Feb 03, 2008 3:33 pm

Postby obet_carlos » Tue Jul 21, 2009 9:36 am

im not really sure.. hindi pa kasi ako nakagamit ng inverter.. IMO, i'd buy a new pump.. since may madadagdag na power consumption yung converters at inverters.. hindi ko lang sure kung ilang watts..
User avatar
obet_carlos
reefphilippines supporter
 
Posts: 6530
Joined: Sat Jan 13, 2007 7:00 am
Location: Parañaque

PreviousNext

Return to Do It Your Self

Who is online

Users browsing this forum: No registered users and 3 guests

cron