DIY: Make 50Hz/220VAC motors run under 60Hz/220VAC ***

A forum for all those projects you want to build on your own

Postby jackryan » Tue Jul 21, 2009 10:50 am

i can lend you the inverter I got from HK... 50hz yun... if you want to get one, i have some folks right now in HK this week, we can ask them to get one for you too... ;)
JackRyan's 225G 6'x2'x2.5' Tank Project

* RO (DDNW-150-6530 2pumps) + ORP
* Teco TR20 + 2x MaxSpect 160w LEDs + Vin's Cab+Sump *
* 2x Vortech MP40W + RKE + FS-WaveBox + 3xTunze Pumps on 2x 7095's + HF20 *
User avatar
jackryan
Moderator
 
Posts: 6596
Joined: Wed Dec 14, 2005 12:22 am
Location: Metro Manila, Philippine Islands

Postby ASAN3.1416 » Tue Jul 21, 2009 11:33 am

jackryan wrote:i can lend you the inverter I got from HK... 50hz yun... if you want to get one, i have some folks right now in HK this week, we can ask them to get one for you too... ;)


ninong makano :?: cheapy lang ba :lol:
22 gal AGA nano w/ ATS and Cheato
150 par 38 MH 20k
User avatar
ASAN3.1416
reefphilippines supporter
 
Posts: 1319
Joined: Sun Feb 03, 2008 3:33 pm

Postby jackryan » Tue Jul 21, 2009 1:01 pm

mas mahal kesa sa cdrking i think...
JackRyan's 225G 6'x2'x2.5' Tank Project

* RO (DDNW-150-6530 2pumps) + ORP
* Teco TR20 + 2x MaxSpect 160w LEDs + Vin's Cab+Sump *
* 2x Vortech MP40W + RKE + FS-WaveBox + 3xTunze Pumps on 2x 7095's + HF20 *
User avatar
jackryan
Moderator
 
Posts: 6596
Joined: Wed Dec 14, 2005 12:22 am
Location: Metro Manila, Philippine Islands

Postby jackryan » Mon Sep 07, 2009 4:40 pm

I recently posted a recommendation for those interested to buy the BELKIN branded inverter (200w, 220vac/50Hz rated) from the Belkin Store at SM North EDSA Annex Building. This sells for Php 1,690.

The next model is an 85watts version but sells for about php 1,390.
JackRyan's 225G 6'x2'x2.5' Tank Project

* RO (DDNW-150-6530 2pumps) + ORP
* Teco TR20 + 2x MaxSpect 160w LEDs + Vin's Cab+Sump *
* 2x Vortech MP40W + RKE + FS-WaveBox + 3xTunze Pumps on 2x 7095's + HF20 *
User avatar
jackryan
Moderator
 
Posts: 6596
Joined: Wed Dec 14, 2005 12:22 am
Location: Metro Manila, Philippine Islands

Postby jackryan » Mon Sep 07, 2009 4:41 pm

For best results, either you use a car battery or a 12VDC regulated / switched converter that is at least 3 amps (and upwards)...
JackRyan's 225G 6'x2'x2.5' Tank Project

* RO (DDNW-150-6530 2pumps) + ORP
* Teco TR20 + 2x MaxSpect 160w LEDs + Vin's Cab+Sump *
* 2x Vortech MP40W + RKE + FS-WaveBox + 3xTunze Pumps on 2x 7095's + HF20 *
User avatar
jackryan
Moderator
 
Posts: 6596
Joined: Wed Dec 14, 2005 12:22 am
Location: Metro Manila, Philippine Islands

Re: DIY: Make 50Hz/220VAC motors run under 60Hz/220VAC ***

Postby bagz727 » Sun Jun 27, 2010 4:30 pm

hi, just want to know where i can buy the 220VAC to 12VDC converter (3-5Amps) regulated? i already have the inverter 220v 50hz form cdr king. thanks
SanMig Light+Aquarium= :)
User avatar
bagz727
reefphilippines member
 
Posts: 1081
Joined: Fri Aug 28, 2009 5:04 pm
Location: Laoag City, Ilocos Norte

Re: DIY: Make 50Hz/220VAC motors run under 60Hz/220VAC ***

Postby choypogi07 » Sun Jun 27, 2010 4:54 pm

@bagz
chief, sa ace ko nabili ung converter ko dati.. around 900 ata yun..
corals die faster than fish when even one of your parameters is off the charts..
User avatar
choypogi07
reefphilippines member
 
Posts: 1282
Joined: Wed May 21, 2008 3:47 pm

Re: DIY: Make 50Hz/220VAC motors run under 60Hz/220VAC ***

Postby bagz727 » Sun Jun 27, 2010 4:59 pm

ok naman sya, gumagana na mga pump mo?
SanMig Light+Aquarium= :)
User avatar
bagz727
reefphilippines member
 
Posts: 1081
Joined: Fri Aug 28, 2009 5:04 pm
Location: Laoag City, Ilocos Norte

Re: DIY: Make 50Hz/220VAC motors run under 60Hz/220VAC ***

Postby choypogi07 » Sun Jun 27, 2010 5:48 pm

yep, gumagana naman.. dati pa yun sir, old setup ko pa.. :mrgreen:
corals die faster than fish when even one of your parameters is off the charts..
User avatar
choypogi07
reefphilippines member
 
Posts: 1282
Joined: Wed May 21, 2008 3:47 pm

Re: DIY: Make 50Hz/220VAC motors run under 60Hz/220VAC ***

Postby bensol » Sat Dec 22, 2012 11:20 pm

Sir,

I purchased a popsicle machine from China and the power supply specification is 220V/50 Hz 2KW/8Amp. do you have available converter for this machine, or do you know somebody who are supplying converter for high wattage machine. If you have please let me know I want to buy.

Thank you and hoping for your positive reply,

Best regards,
Ben Solomon
bensol
reefphilippines member
 
Posts: 1
Joined: Sat Dec 22, 2012 11:08 pm

Re: DIY: Make 50Hz/220VAC motors run under 60Hz/220VAC ***

Postby jaycee008 » Tue Jan 15, 2013 11:24 am

AFAIK pwedeng gamitin ang mga 50Hz equipments dito sa atin sa pilipinas, ang masama ay ang vice versa nito (using 60Hz equipments in a country utilizing 50Hz frequency)
jaycee008
reefphilippines member
 
Posts: 1
Joined: Tue Jan 15, 2013 9:46 am

Re: DIY: Make 50Hz/220VAC motors run under 60Hz/220VAC ***

Postby jackryan » Tue Jan 22, 2013 11:23 am

some motors would run warmer than usual... some motor pumps would seem to run not in-sync...

as for your requirement, unfortunately, your load may be too high to make this as a practical option...
JackRyan's 225G 6'x2'x2.5' Tank Project

* RO (DDNW-150-6530 2pumps) + ORP
* Teco TR20 + 2x MaxSpect 160w LEDs + Vin's Cab+Sump *
* 2x Vortech MP40W + RKE + FS-WaveBox + 3xTunze Pumps on 2x 7095's + HF20 *
User avatar
jackryan
Moderator
 
Posts: 6596
Joined: Wed Dec 14, 2005 12:22 am
Location: Metro Manila, Philippine Islands

Previous

Return to Do It Your Self

Who is online

Users browsing this forum: No registered users and 4 guests

cron