Page 1 of 2
jancorwin12 DIY LED fixture
Posted:
Thu Jun 12, 2014 6:36 pm
by jancorwin12
try lang mag diy para magamit sobrang leds and driver. baka makapag setup pa ako another tank at magamit. will be doing this with a fellow south reefer who is an expert in electronics. more on sya gagawa, taga kontra lang ako, hehe
heat sink from t. alonzo
dimmable driver. can accomodate 35 leds during our test, around 18 minimum. enjoy ako dahil may meron na rin kabitan ng fan, hehe
leds, lens, and dimmer knob
Re: jancorwin12 DIY LED fixture
Posted:
Thu Jun 12, 2014 6:37 pm
by jancorwin12
updates since nakapagkalikot dahil walang office.
testing lights before idikit sa heat sink at i-finalize ang wiring:
90 degrees lens on whites
lens on blues
all with lens
ang malufet na box with safety features. decided to separate other parts from the heatsink para safe.
kasya dalawang drivers, hehehe. iniisip ko tuloy na dalawa units na gawin.
next update this weekend ... hehehe
Re: jancorwin12 DIY LED fixture
Posted:
Thu Jun 12, 2014 6:43 pm
by piyekdotcom
Ayus
Re: jancorwin12 DIY LED fixture
Posted:
Thu Jun 12, 2014 7:07 pm
by jancorwin12
Re: jancorwin12 DIY LED fixture
Posted:
Sat Jun 14, 2014 9:30 pm
by jancorwin12
getting ready to drill holes
Re: jancorwin12 DIY LED fixture
Posted:
Sat Jun 14, 2014 9:38 pm
by loidimi
Bro magkano bili mo sa pang bench drill? Universal ba yan sa ibang brand?
Re: jancorwin12 DIY LED fixture
Posted:
Sat Jun 14, 2014 11:34 pm
by jancorwin12
nahiram ko lang yan, hehehe. tanong ko kung magkano bili.
Re: jancorwin12 DIY LED fixture
Posted:
Sat Jun 14, 2014 11:49 pm
by jancorwin12
hindi na ako nakapag drill dahil baka batuhin ako kapitbahay, nag layout na lang ako sa isa pang heat sink. 25 leds, 21 430nm and 4 cool whites (yung nakabaliktad na lens sa picture yung white). ayos kaya ito?
Re: jancorwin12 DIY LED fixture
Posted:
Mon Jun 16, 2014 2:03 am
by jancorwin12
updates lang sa 430nm project. completed drilling holes and attaching the leds. next step is to solder the wire, so far dalawa pa lang na solder ko, eto yata pinakamahirap step sa akin. medyo pasmado na, hehehe.
Re: jancorwin12 DIY LED fixture
Posted:
Mon Jun 16, 2014 9:24 am
by piyekdotcom
Patapos na pla ser, malalagay mo n dun sa sa 1 tank mo
Re: jancorwin12 DIY LED fixture
Posted:
Mon Jun 16, 2014 3:22 pm
by jancorwin12
hirap mag solder, hehehe. gusto ko rin gawa frag tank e
Re: jancorwin12 DIY LED fixture
Posted:
Mon Jun 16, 2014 11:33 pm
by jancorwin12
sa wakas natapos din ang wiring at soldering, mapapailaw na rin
tignan niyo yung maliit na switch sa dulo heatsink, astig yan, hehehe, switch to turn on/off the whites
430nm only
with whites, using astig na switch
pagpasensyanhan na ang wirings, mahirap gawin with this design
next step, ikabit sa mahiwagang black box
Re: jancorwin12 DIY LED fixture
Posted:
Tue Jun 17, 2014 2:22 pm
by boom_smashers
sir saan and how much ang bili mo sa driver?
Re: jancorwin12 DIY LED fixture
Posted:
Tue Jun 17, 2014 2:46 pm
by jancorwin12
meron ako sobra. gusto mo? hehehe.
Re: jancorwin12 DIY LED fixture
Posted:
Fri Jun 20, 2014 1:25 am
by jancorwin12
updates lang sa black box ko