reefphilippines.com

just want to share my DIY LED MODULE SMD 5050, its just a try to make an DIY LED for a small budget to my 35gallon tank.

the estimated cost of all:
[1 led module of smd 5050(3 led's/module)= 25php/module]
so, 15x25= 375 php for the led's
aluminum heatsink = 30php/inch
i have 30" tank, so i made an 24" heatsink. 24x30= 720 php
heatsink fan= 150 php
the AC/DC adaptor= 150 php
electrical wirings= 100 php
TOTAL COST:
375+720+150+150+100= 1360 php


UPDATE:

UPDATE.

will you be using this on a reef tank?

same question here.

i think this would not suffice in a reef setup, but if intended for FOWLR or aesthetic purposes only then it would do the job.

FOLWR lang po muna yan pra makacycle nung tank g kapatid ko po..pero pagnagreef tank na sya,papalitan namin yan..for ligthing lang po yan pra maganda. sa anemone lang po muna yan..

Dba mas malaki ang Lighting needs ng Anemone?

Ito ung lighting sa tank



ito naman ung carpet anemone ko


at ito ung purpletip anemone ko

Hi. Bleached ata yun anemones mo.

I'm hoping sana makahanap ka ng mas malakas ng lighting for your anemones. Mukha kasing "barely surviving" lang sila dahil sa pag-feed mo, pero yun symbiotic algae niya wala na.

nice leds sir, sana nag iwan ka na lng ng space sa heatsink kung maguupgrade ka rin ng leds. ung current setup mo for me pwede na cyang pang monnlight na lng para di rin sayang ung gawa mo. Keep it up sir!