DIY 87W (29 X 3W) Semi Full SPECTRUM LED array
Posted: Tue Apr 08, 2014 7:11 pm
Hi guys,
Uso naman kaya makisabay na ako..
My tank's dimension was 36x16x14(lxwxh)
DIY Semi full spec 3W LED array
Update ko na lang tong 1st page para sa pics and other procedure
Inspired by kenn's 90W LED array.. blue:white:blue
Parts used:
A. 3W LED from GoDeals (Aarongo222):
20pcs Blues
5pcs Whites
1pc Red
1pc Green
2pcs UV
B. 3pcs (7~12 x 3W) Waterproof LED Driver
C. 60 degrees LED lens (Blue LED)
D. 90 degrees LED lens (Whites, Red, Green and UV)
E. 12V PC fans (0.3A ~ 0.45A)
F. 12V 1A adaptor (supply for fans)
G. AWG#22 wires (good for 918mA of current), 3W LEDs have a 680mA forward current so this is enough
H. 24 inches heatsink
I. Thermal glue/paste
Tools for soldering, cutting wires.. etc
LEDs mounted on heatsink
Wiring done: Very straight forward wiring..
blue : white/green/red : blue.. 1 driver each channel
Without lens:
With lens tested:
Driver
Uso naman kaya makisabay na ako..
My tank's dimension was 36x16x14(lxwxh)
DIY Semi full spec 3W LED array
Update ko na lang tong 1st page para sa pics and other procedure
Inspired by kenn's 90W LED array.. blue:white:blue
Parts used:
A. 3W LED from GoDeals (Aarongo222):
20pcs Blues
5pcs Whites
1pc Red
1pc Green
2pcs UV
B. 3pcs (7~12 x 3W) Waterproof LED Driver
C. 60 degrees LED lens (Blue LED)
D. 90 degrees LED lens (Whites, Red, Green and UV)
E. 12V PC fans (0.3A ~ 0.45A)
F. 12V 1A adaptor (supply for fans)
G. AWG#22 wires (good for 918mA of current), 3W LEDs have a 680mA forward current so this is enough
H. 24 inches heatsink
I. Thermal glue/paste
Tools for soldering, cutting wires.. etc
LEDs mounted on heatsink
Wiring done: Very straight forward wiring..
blue : white/green/red : blue.. 1 driver each channel
Without lens:
With lens tested:
Driver