Page 1 of 3
ALL YOUR DIY NEEDS
Posted:
Fri Jun 09, 2006 5:46 pm
by chonglai
hi
Posted:
Wed Jul 19, 2006 10:18 pm
by chris
Posted:
Mon Jul 31, 2006 12:42 pm
by paulimjada
Posted:
Fri Mar 09, 2007 4:09 pm
by nerrawdor
Re: ALL YOUR DIY NEEDS
Posted:
Thu May 20, 2010 3:27 pm
by silver gabarda
abangan ko to!
Re: ALL YOUR DIY NEEDS
Posted:
Sun Feb 27, 2011 7:13 pm
by Sea Turtle
for various acrylic needs you may contact manila acrylic center thru 241-0669. ang alam ko nagpuputol din sila according to size. they sell acrylic adhesives too.
Re: ALL YOUR DIY NEEDS
Posted:
Tue Jun 21, 2011 10:18 pm
by kentpoy23
anung petsa na wala parin laman? hahaha peace
Re: ALL YOUR DIY NEEDS
Posted:
Wed Jul 13, 2011 1:48 pm
by jemzac
I need a glue that i can use for the LR & corals. It should be safe for the inmates also & that i can use even wet. Any suggestions? Thanks
Re: ALL YOUR DIY NEEDS
Posted:
Wed Jul 13, 2011 1:58 pm
by obet_carlos
pioneer epoxy aqua..
Re: ALL YOUR DIY NEEDS
Posted:
Tue Jun 05, 2012 11:14 am
by tronixlab
Kung kailangan nyo ng adhesive na flexible, transparent at pwede alternative sa mighty bond at locktite, try multigrip adhesive, available sa Ace hardware.
Re: ALL YOUR DIY NEEDS
Posted:
Wed Jan 15, 2014 7:12 pm
by jancorwin12
Looking for acrylic sheets for DIY, box lang for ATS.
May alam po ba kayo na bilihan sa south area or baka po meron kayon excess na gusto ibenta? Maraming salamat po.
Re: ALL YOUR DIY NEEDS
Posted:
Tue Sep 02, 2014 1:11 am
by puroy
Saan nakakabili ng bulkheads dito sa metro manila? Thanks!
Re: ALL YOUR DIY NEEDS
Posted:
Tue Sep 02, 2014 8:18 am
by mindfreak
someone posted an FS here last week only.
viewtopic.php?f=6&t=17672
Re: ALL YOUR DIY NEEDS
Posted:
Tue Sep 02, 2014 9:36 am
by immortalbreaker
you can try this too. didnt have problems with it on my old tank. no need for silicon. use teflon tape for the male and female adaptor. rubber o-ring is from a local plumbing store here at malolos. or you can get the o-ring from a spare union.
Re: ALL YOUR DIY NEEDS
Posted:
Tue Sep 02, 2014 2:46 pm
by yose_