splitting the switches on a double ballast
Posted:
Wed Sep 19, 2012 8:42 amby dwarven
hi mga gurus's i need help regarding my double ballast if the switches can be separated like if actinic or white only.. e2 ung picture ng circuit diagram.
san iinsert ung switches???
Re: splitting the switches on a double ballast
Posted:
Wed Sep 26, 2012 9:04 amby actino
Not really sure but maybe a switch on #6 or #7.
Then another on #1 or #2.
Not sure on this because what we normally do is put a switch on the power supply. But since there is only one power supply and 2 outputs, Maybe putting a switch on the output would simulate a bulb that is not working. Not sure if this actually safe or makes any sense.
Maybe some other members here with more experience can chime in.
Re: splitting the switches on a double ballast
Posted:
Sat Oct 06, 2012 10:40 amby obet_carlos
pwede kahit saan mo ilagay yung switch, kaso pag sa 4 patay both.. a switch may simulatea broken bulb as actino said.. however, i think the output of fluorescent drivers are in the kV range.. baka hindi kayanin ng switch in the long run.. kasi mga switch usually rated for 250V lang..