reefphilippines.com

Here is my latest DIY, compliments of roygt, he was the one who gave the link to reefcentral.. hehehe ty roy!

items needed

1 powerhead ( i used an existing precision 1000lph phead for this modding, i'm currently working on a seaquest600)

1 1/4" pvc coupling
1/8" rigid plastic tubing (from a corner filter )
1" long ordinary airhose
superglue
electric drill

PROPELLER????
I had trouble finding a propeller, the one from Lil's hobby shop costs P450 more expensive than my powerhead i had to find another....
well... to make it short... I made one from a strip of acrylic..



most of the procedures done is almost the same with the modding at reefcentral... if you want to do this modding? its quite simple. I'd be happy to help you if you want one

front view of the assembly...



here it is in the tank, not yet plugged



now running... as you can see it created a small water spout above, I had to submerge it atleast halfway in my tank to avoid sucking air at the same time sucking the sand below it.



this is just my first try on this modding, I hope my next try would be a lot cleaner..

I'm yet to discover the flaws. I haven't installed the stopper to make sure the propeller turns the right direction...

wax> pare isa kang halimaw! galing ah!
pero bakit parang microbubbles na lumalabas?

yun nga... the suction of the propeller created a small water spout. I had to place the phead deeper in to the tank to avoid it.

nice mod pre! sa tingin mo ba mas malakas buga niyang powerhead mo kesa dati? tska pano yung acrylic strip na yun pre? kinorte mo bang propeller or ganun na agad kabit mo?

another mod for your powerheads. medyo mas madali

lalagyan ko lang petruding plastic tube sa loob pag baligtad ikot tatama yung prop tpos ikot na cya pabalik. oo ayus na ayus to wavemaker..