Kalk Reactor Problem
Posted: Wed Nov 05, 2008 9:01 ami have been through 2 pumps of otp-500 for my KR-100.. ang bilis masira.. although both were not brand new.. am i doing anything wrong? don't get me wrong here.. i have an otp-1000 for my RO DNW-110.. i have cleaned it for only 3-4 times in the two years that i have had it.. last clenaning was early summer pa ata.. very reliable and sturdy.. kahit 1 scratch sa loob ng pump wala..
for my kalk reactor, i use the analog timer and turn on the reactor once a day for 15min.. since it is the minimum setting.. both problems were that the impeller separates from the magnet.. masyado bang matagal yung pag-on ko ng pump? i already consulted with sir aquariatech and maybe the cause is that masyado matagal yung pag-on ko.. i was just wondering if someone else has had the same problem i am encountering right now..
for my kalk reactor, i use the analog timer and turn on the reactor once a day for 15min.. since it is the minimum setting.. both problems were that the impeller separates from the magnet.. masyado bang matagal yung pag-on ko ng pump? i already consulted with sir aquariatech and maybe the cause is that masyado matagal yung pag-on ko.. i was just wondering if someone else has had the same problem i am encountering right now..