Still No Solution For my R.O. Problem. ( Solved )

[techsheep]

Apparently after 10mos of usage ( DNW-110 ) , I find my skimmer not skimming well. The factors I considered would be: The intake pump ( seaquest 800 ), the Reef Octopus recirculating pump, cleaning and water salinity. All material thing have been replaced, salinity increased to 1.025, all tubes n pipes cleaned. still no bubbles like before are being produced. What could be the problem? I don't think my water is that clean. Fishes are all healthy.

Do I need to buy another Reef Octopus? I need to identify what happened despite all the maintenance spending I've done.

[berwyn_realina]

[christian]

[berwyn_realina]

[christian]

[berwyn_realina]

[christian]

[vin]

[jackryan]

[vin]

[techsheep]

[jackryan]

bro techsheep, really OT na 'to but this is your thread naman, the most active right now in this forum is gamol (lendz), mikedown and Vin DaGunsmith

I am on semi-retirement but hoping to play in N vs S 3 soon

Make sure you have extra protection... as always safety first !

Enjoy the adrenaline rush...

[techsheep]

[AquariaTech]

[techsheep]

Finally, skimmer worked again. Thanks for all the suggestions and advices, I've tried all the suggestive actions.

Here's what i did, cleaned the air intake but still nothing happened, poked the hole with pin, stick, toothpick. So i tried to soak it on alcohol for a day and pumped air from my basketball pin pump. Then the problem turned out to be an ant ( big ) got stuck inside that came out ( obviously dead ).

My ro is back to it's usual skimming job. thanks to those who gave suggestions.