reefphilippines.com

Just wanna share my new tank. transfered all the livestocks from from my 1yr old 75gal.

Thanks to all who patiently answered my questions (di ko na iisa isahin sa dami)

Total water volume: aprox. 50gals

Filtration:
Live rocks
Display and sump DSB
ATS
Macro algae

Lights:
DIY e27 3w spot LEDs

Saltwater:
50% NSW + 50% DIY salt

FTS









Sump



Overflow



ATS




DIY Bulkhead

Ayus, linis! Galing din ng pagkasetup ng sump area.

BTW bro, san ka nakabili ng rubber O-ring para sa bulkheads? Hassle yan wala ako makitang ganyan.

Sa local store dito sa malolos, na puro plumbing supplies ang binebenta.

40pesos isa, parang mahal nga benta. pwede ka din bumili ng union na lang, tapos kunin mo yun o-ring niya.

Can you post more pictures on all the pipings? I want to see other peoples ideas on piping. Also how many water pumps are you using? and what size are your pipes? Thanks. Very clean sump. Everything is well planned out.

tnx tnx! when i plan the tank, what i have in mind is-"last na gastos na to, never again!" hehe.

also want a low operational and maintenance cost

kaya gnawa ko muna sa autocad in 3d bago ako nag start

i have 4-1inch drain (1 feed the ats, 1 full siphon, 1 open channel and 1 emergency.)

return pipe is 1/‘2in.

i only use 1 rio 12hf pump for return and 1 12w sunsun wavemaker

i‘ll try to post pic later

Pipings

Left side of overflow


Right side of overflow


DIY strainer for drains that are fully submerged


1" drain pipes (leftmost: open channel, 2nd from the left: full siphon w/ ball valve, right most: emergency, 2nd from the right: feed ats, center: 1/2" return pipe)
For now, pipe with ball valve and ats is enough to accommodate the return pump's GPH


ATS Pipe:

Got the idea here, for easy screen removal:

Return pump:

After 39days I got my cheapo Par30 LED grow lights





Added some e27 spots

Nice pipework bro! By the way, can you pm me where you got those rubber o rings? Thanks in advance!

Nice set up bro

Ang ganda boss! Sarap umuwe ng iyan ang madadatnan mu. Kainggit!

Update

1. Installed my RO unit. 75GPD with booster pump. My unit have an 18 sec. auto flush valve in the drain line. According to the dealer the flow restrictor and manual flush kit is no longer needed because of the auto flush valve. Is that correct?
2. Added more e27 spot led lights. Now have 4x3w blue 30degrees, 5x3w cool white 30 degrees, 1x3w red no lens.
3. Remove most of the caulerpa due to major die off. Maybe due to lack of water change? or due to wrong spectrum of the grow lights? from what I have read deep red/blue combination is optimal for algae. Or due to Vodka dosing(i'm on my 2nd week at 1.5ml a day)?
4. removed the ATS and replaced with a DIY Skimmer
5. Added some soft corals and cleaner shrimp from monching

astig diy skimmer mo ah. anong pump ginamit mo dyan?

sea quest 2200 lang. mesh mod w/ 4 layer green plastic screen, with bubble trap sa loob nun 3" PVC.

May mga sobra lang ako gamit from construction project, kaya napag tripan ko gawin yun skimmer. 3" ginamit ko instead na 4" pvc para mautilize ko yun hanging bracket ng queen skimmer.

I'll try to post more pics later kun pano ko ginawa. ginaya ko lang yun concept ng ng space saving RO skimmer.

eka nga ni mrs, gagawa ka na naman ng skimmer?!?

Mesh mod


DIY bubble trap




Collection Cup



Whole Unit


All materials are from scrap or left over from my construction project.
You can use ball valve instead of the white repair coupling to adjust water level.

6 weeks into vodka dosing. Now at 3.5ml a day

2days worth of skimmate